- City: Houston
- State/Province: TX
- Country: United States
- Quantity: 1
- Allow Deals: Yes
- Demo Page URL: https://inventory.freeoilfieldquote.com/product/sand-king-appco-fs40
- I Want To: Sell
- Telephone Number: 512-357-7881
- Email Address: email@example.com
- Listed: February 10, 2019 10:44 am
- Expires: 1027 days, 9 hours
Name: Sand King | APPCO | FS40
Subcategory: Sand Handling Equipment
Location: Houston, Texas
Condition: Excellent – Operational
Short Description: NOV APPCO FS-40 Trailer Frac Sander Unit
NOV APPCO – MODEL FS-40 FRAC SANDER
Option 1 – Dust Control System ADD US$ 31,000.00
ORIGINAL SALES PRICE: $281,380.00
The NOV Appco Model FS-40 Frac Sander Unit is a trailer mounted sand storage and delivery system for feeding proppant to the sand hopper of a fracturing blender. This unit uses a corrugated sidewall conveyor belt with four (4) proppant compartments with a rear mounted discharge chute. This unit is designed for operation in the oilfield environments in temperature ranges from 0 degrees C to 50 degrees C (32 degrees F to 122 degrees F).
This unit is self-contained for unit operation and shall be designed to work in a complete frac spread for fracturing operations.
The approximate dimensions of this trailer unit are as follows:
-Length-59’ – 5”(18.1 meters)
-Width-11’ – 0”(3.4 meters)
-Height-13’ – 6”(4.1 meters)
-Weight-55,000 lbs(24,948 kgs)
This will be a heavy-duty trailer with the following features:
-Gooseneck deck height sized for 52” Kingpin height
-Two (2) hydraulic landing legs
-Two (2) oil bath axles
-Eight (8) 11.00 R22.5 tubeless tires with steel wheels
-Brakes air type with ABS axle
-Parking brake air chambers mounted above axles
-Two (2”) inch SAE king pin with 3/8 rub plate
-Lights – stop/turn/clearance
-Fenders, front and rear
-Running lights for highway use
-Tow eyes mounted on front sides and back of unit
3.0 PROPPANT COMPARTMENT
Included with this unit will be a four (4) compartment 4,000 cubic feet total capacity proppant storage vessel mounted on an oilfield trailer.
This vessel includes the following features:
-Four (4) proppant compartments
-The compartment will have 4” Sch. 80 fill pipes with cam locks to blow sand into the compartments.
-A conveyor that raises and lowers (for transport) at the end of the trailer with detachable chute to control the proppant delivery. The control system will provide smooth adjustment of the sand chute to the blender. The conveyor shall contain the following features:
°24” wide conveyor with 2-1/2” high side walls
°Belt speed rated 630 FPM equal to 22,000 lbs. per minute
°A ground accessible transport latch to secure the stinger assembly for transport.
-Removable side guards shall be installed to limit access to conveyor belt.
-Stairway on front of trailer
-Roof mounted diamond plank walkway with roof mounted hinged handrails
4.0 HYDRAULIC SYSTEM
Included with this unit will be a hydraulic power system. The system will be powered by unit mounted diesel power pack. The power pack shall consist of the following components:
-Cummins QSB4.5 Tier 3 engine rated 110 BHP – 12 VDC
-These engines meet EPA Tier 3 non-road diesel standards and are covered under NOV FLEX program for use in the USA.
-Open loop hydraulic pumps
-40 gal fuel tank with level indicator
-Auxiliary hydraulic connections
-Hydraulic heat exchanger
This hydraulic power system will be designed to power the following components from the lower and upper controls.
-Hydraulic flow control valve for conveyor speed
-Nine (9) compartment slide gate valves with gate position indicator panel
This hydraulic power system will be designed to power the following components from the lower controls.
-Two (2) hydraulic screw jack pads with pressure cut off in “Full up” and “Full down”
-Rear conveyor height
This hydraulic circuit will include a minimum the following basic components:
-Hydraulic reservoir common to all systems including:
°Sight level gauge
-Hydraulic filtration for open loop common return line
-Hydraulic cooler sized for ambient conditions
-Hoses shall be high quality rubber coated hoses with crimp type fittings rated and sized per the minimum requirements of the respective system. All piping shall be o-ring flat face seal seamless tubing.
-All hoses will be restrained and guarded to prevent them from contacting moving parts
5.0 UNIT COMPLETION
Supplied with the unit will be the following standard equipment. Note: This equipment will be part of the above unit, and if already mentioned an item will not be duplicated.
-One (1) fire extinguisher
-Test certificates (two (2) copies) shall be supplied in English. Any certification of vendor supplied components (engines, transmissions, pumps, high pressure iron, etc…) should be requested in writing at the time of purchase.
-Manuals (two (2) copies) shall be supplied in English at time of delivery. Manuals shall include operating and maintenance procedures for purchased compone
144 total views, 2 today